Epoxy Powder Coated Bracket and Spring Coil
Patented, Self-Centering Cap US Patent number 5,653,426
How the self-centering no short cap works
Indexed steps in spring cap correspond to standard washer diameters for the appropriate rod diameter. The washer and rod stay centered in the cap.
Description
Kinetics Model SH Vibration Isolation Hangers are designed to reduce the transmission of vibration and noise produced by suspended equipment and piping. SH Hangers incorporate a high deflection color-coded spring element, a "no short" spring cap, and noise isolation pad, assembled into a stamped or welded hanger bracket. To assure stability, the spring element has a minimum lateral spring stiffness of 1.0 times the rated vertical stiffness. SH Hangers will allow a support rod misalignment through a 30° arc without short-circuiting. Isolation brackets will carry a 500% overload without failure. Hangers are available in deflections from 1" to 2" (25 to 51 mm) and 4" (102 mm), and in capacities from 35 to 3,850 lbs. (16 to 1747 kg) for 1" and 35 to 3250 lbs. (16 to 1475 kg) for 2" deflection hangers. SH Hangers are effective in isolating vibration produced by low rpm equipment. Kinetics Model SH Hangers are recommended for the isolation of vibration produced by suspended mechanical equipment, in-line and exhaust fans, ductwork, piping, etc.
Application
Kinetics Model SH Hangers are recommended
for use in isolating suspending sources of inaudible frequency vibration,
located near critical vibration-free areas.
Suspended mechanical equipment such as in-line fans, cabinet fans, and piping and ductwork in close proximity to mechanical equipment are typical uses of Model SH hangers.
Standard Model SH hangers are shipped fully assembled and ready for installation in threaded metal rod suspension systems.
Model SH hangers are available in a wide range of load and static deflection selections, and can be provided with labor-saving accessories for preloading ease in erecting piping at a fixed elevation.
| Dimensions and Capacities |
|
SH-1 |
|
SH-2 |
|
SH-4 |
|
(m) Signifies Metric Drawing |
|
