Benefits

  • Excellent dampening and isolation characteristics with one side dimpled to further enhance the acoustic properties.
  • Extensive independent testing conducted by the "Institute of Structural Dynamics" at the Technical University of Dresden.
  • Maximum load bearing capacity - 0.05N/mm2 (5t/m2).
  • Regupol RAV100 anti-vibration material is completely recyclable and can therefore complement companies "Environmental Policies".
  • No expensive mechanical parts.
  • Supplied in easy to lay rolls or can be individually cut into pads/strips to suit exact installation. 
  • Quick and easy to install
  • If using adhesive, virtually eliminates the need for anchor bolts, thus reducing floor damage.
  • Enables flexibility of floor layout.  

Description
Regupol RAV100 is a high performing, yet cost effective polyurethane bound rubber granulate material formulated to dampen and/or isolate noise and vibrations at source and has been specifically developed for the machinery mounting industry.  Regupol RAV100 is different to all other Regupol anti-vibration products in that it has a dimpled surface on one side giving the material excellent acoustic characteristics. Regupol RAV100 will retain its anti-vibration properties throughout a long and maintenance free lifespan and can withstand loads of up to 0.05N/mm2 and is 100% recyclable.

Physical Information
Roll dimensions: 10m x 1.25m.
Standard thickness: 17mm (dimpled surface one side).
Individual pad/strips can be supplied upon request.

Applications

Regupol RAV100 has a multitude of applications and can be used in both non-critical and critical areas whether for dampening or isolation of noise and vibrations respectively and has been used for:

  • Lift motors
  • Pumps
  • Air conditioning units (ACU's)
  • Refrigeration units
  • Inertia pits
  • Machinery with out of balance forces e.g. lathes, pillar drills, shapers, saws, etc.
  • Machinery with vertical shock loads, e.g. guillotines, power presses, etc.
  • Sensitive areas such as Laboratories, nano sensitive equipment, etc.

For information relating to specific applications and suitable adhesives, please contact CMS Vibration Solutions Technical Department. To aid in the correct material being recommended, please provide as much information on the application as possible, such as:

  • Weight of Machine
  • Motor Speed (RPM)
  • Channel, Plinth or individual footprint dimensions