Benefits

  • Excellent Dampening and Isolation characteristics with high load bearing characteristics.
  • Extensive independent testing conducted by the "Institute of Structural Dynamics" at the Technical University of Dresden
  • Maximum Load Bearing Capacity - 0.8N/mm2 (80t/m2).
  • Regupol RAV500 Anti-vibration material is completely recyclable and can therefore compliment companies "Environmental Policies" .
  • No expensive mechanical parts.
  • Supplied in easy to lay rolls or can be individually cut into pads/strips to suit exact installation. 
  • Quick and Easy to Install
  • If using adhesive, virtually eliminates the need for anchor bolts, thus reducing floor damage.
  • Enables flexibility of floor layout

Description
Regupol RAV500 is a high load bearing, yet cost effective polyurethane bound rubber granulate material developed and formulated to dampen and/or isolate noise and vibrations at source and has been developed for not only the machinery mounting industry, but also has extensive applications within the civils and structural industry due to its high load bearing capacity of 0.8N/mm2.  Regupol RAV500 will retain its isolation properties throughout a long and maintenance free lifespan assuming the material does not exceed a load bearing capacity of 0.8N/mm2.  Regupol RAV500 is also 100% recyclable.

Physical Information
 Roll Dimensions: 8m x 1.25m
Standard Thickness: 10mm (Other thicknesses are available upon request).
Individual Pad/Strips can be supplied upon request.

Applications
Regupol RAV500 has a multitude of applications and can be used in both non-critical and critical areas whether for dampening or isolation of noise and vibrations respectively and can be used for:

  • Heavy plant
  • Inertia Pits
  • Machinery with out of balance forces e.g. Lathes, Pillar Drills, Shapers, Saws, etc.
  • Machinery with vertical shock loads, e.g. Guillotines, Power Presses, etc.
  • Sensitive areas such as Laboratories, nano sensitive equipment, etc.
  • Structural Isolation
  • Foundation Isolation
  • Isolation of Partition walls, both timber and metal.

For information relating to specific applications, please contact CMS Vibration Solutions Technical Department. To aid in the correct material being recommended, please provide as much information on the application as possible, such as:

  • Weight of Machine
  • Motor Speed (RPM)
  • Channel, Plinth or individual footprint dimensions

Information relating to the correct adhesive can be sought from CMS Vibration Solutions Technical Department.