Benefits

  • Excellent Dampening and Isolation characteristics with high load bearing characteristics.
  • Extensive independent testing conducted by the "Institute of Structural Dynamics" at the Technical University of Dresden
  • Maximum Load Bearing Capacity - 0.25N/mm2 (25t/m2).
  • Regupol RAV400 Anti-vibration material is completely recyclable and can therefore compliment companies "Environmental Policies" .
  • No expensive mechanical parts.
  • Supplied in easy to lay rolls or can be individually cut into pads/strips to suit exact installation. 
  • Quick and Easy to Install
  • If using adhesive, virtually eliminates the need for anchor bolts, thus reducing floor damage.
  • Enables flexibility of floor layout

Description
Regupol RAV400 is a high performing, yet cost effective polyurethane bound rubber granulate material developed and formulated to dampen and/or isolate noise and vibrations at source and has been developed for the machinery mounting industry, although can be used for structural isolation, where loads permit.  Regupol RAV400 will retain its isolation properties throughout a long and maintenance free lifespan and can withstand loads of up to 0.25N/mm2 and is 100% recyclable.

Physical Information
Roll Dimensions: 10m x 1.25m
Standard Thickness: 15mm (Other thickness' are available upon request).
Individual Pad/Strips can be supplied upon request.           

Applications
Regupol RAV400 has a multitude of applications and can be used in both non-critical and critical areas whether for dampening or isolation of noise and vibrations respectively and has been used for:

  • Lift motors
  • Heavy plant
  • Inertia Pits
  • Machinery with out of balance forces e.g. Lathes, Pillar Drills, Shapers,
  • Saws, etc.
  • Machinery with vertical shock loads, e.g. Guillotines, Power Presses, etc.
  • Sensitive areas such as Laboratories, nano sensitive equipment, etc.

For information relating to specific applications, please contact CMS Vibration Solutions Technical Department. To aid in the correct material being recommended, please provide as much information on the application as possible, such as:

  • Weight of Machine
  • Motor Speed (RPM)
  • Channel, Plinth or individual footprint dimensions

Information relating to the correct adhesive can be sought from CMS Vibration Solutions Technical Department.